How to properly prepare a wardrobe for transportation in Boston.
Before loading, everything should be provided for, taking into account its capabilities. During transportation, the furniture should not lose its original appearance. This applies to cabinet furniture, which is better to transport with everything you need. A special place is allocated for the built-in furniture.
I recommend visiting the website of a good carrier, they will transport any of your things in Boston https://www.goborntomove.com/local-moving
Marking of the details of the wardrobe will be required in order not to confuse the elements during assembly. The removed parts should be packed separately, secured with masking tape. At the same time, it is better to remove them as far as possible in the rack, then you will not have to look for them.
What needs to be done:
To begin with, the compartment attached to the wall needs to be detached and the built-in backlight disconnected.
After marking, the shelves should be packed. This is necessary in the case when the boxes have roller guides. If there are ball guides on the side of the drawer panels, remove the screws.
In order to avoid distortions, it is best to disconnect the doors from the lower hinges, and then you need to remove the upper ones.
Next, you need to carefully lift the wardrobe door by pressing the lower rollers. Then you should pull the door towards you so that the flap slides out of the lower compartment. If the door is pulled down at a slight angle, it will slip out of the upper compartment.
In order to remove the hinged door, you need to pull it on yourself, having previously unscrewed special bolts with a horn wrench. Here you also need to remove the closers. Some doors have latches, which should be turned up before disassembly. Here you will need the help of a master, since the cabinet doors are heavy and it is not always possible to remove them yourself.
If there are mezzanines, then they also need to be packed. Next, remove the rear panels, as well as the side panels and the top cover.
The mezzanine needs to be properly packed.
In a small container, you can collect screws, screws, nails, and then pour them into a bag and sign.
If the wardrobe has no side walls and is built into a niche, then the shelves should be removed and the guides should be detached from the ceiling and floor. According to the instructions, you can quickly disassemble and assemble the furniture. If there are no instructions, it is recommended to photograph the step-by-step process and then assemble everything correctly.
The parts should be assembled after disassembly, and the parts of the cabinet should be packed using a special film, corrugated cardboard or polyethylene. Then the furniture is to be transported.
How to transport a cabinet without doors? The cabinet in disassembled form can be unstable, so it is best not to remove the mirror doors. The handles of the cabinet doors need to be unscrewed by turning inside. Then they need to be tightly screwed again and fastened with tape.
Mounting of wardrobes is carried out from special parts of different sizes. In the presence of glass inserts, the assembly and disassembly of such furniture becomes more complicated, so you can not do without the help of a master. If there are no skills in this matter, then it is best not to take on this job, but entrust it to a specialist.